Infineon Technologies AG further expanded the EconoPIM ™ 3 package of IGBT module products, with the module's rated current increasing from 100 A to 150 A, up 50%. The new power modules can meet the ever-increasing demands for higher power densities at the same size. Typical applications include motor control for elevators, escalators, fans or pumps.

The EconoPIM ™ module is characterized by a high degree of integration of different functions. For example, a module contains a three-phase rectifier bridge, a brake chopper, a three-phase inverter bridge and an NTC thermistor for measuring the temperature, with a blocking voltage of 1200 V. The new EconoPIM ™ 3 module achieves maximum current of 150 A - this is the maximum current specification for similar designs on the market.

The module is packaged with a substrate that conforms to the industry standard. Therefore, the new module can be easily achieved directly replace the existing design. In this way, EconoPIM ™ 3 can increase the output power by 30% at the same size in motor-driven applications. The module uses Trenchstop ™ technology IGBT 4 chip, the chip has been tested, with high durability and reliability.

The new EconoPIM ™ module with a specification of 1200 V / 150 A can be supplied with a solder pin or pressFIT pin. All IGBT 4-chip models with Trenchstop ™ technology are available in two pins. In addition, the module can be pre-coated thermal medium (TIM) specifications. The new power module has been commissioned and can be ordered. For more information, please visit electronic components website.

Photo Description: The new EconoPIM ™ 3 1200 V / 150 A models are available with solder pins or PressFIT pins. All IGBT4 chip models with Trenchstop ™ technology are available in two pins. In addition, the module can be pre-coated thermal medium (TIM) specifications.

Reference: pmdxb950upe and nrf51822